DSS-M15 is a heavy-duty metal gear standard servo with 180°wide angle, high torque power, improved stability and durability.
Able to take in 6V and deliver a strong torque power of over 15Kg, this tough 180°servo will never let you down when you need it. Tested with high load capacity for 12 hours long, this DSS-M15 servo demonstrates a maximum torque of 18Kg without much vibration or heat.
In addition, we enclose carefully selected steering parts, including an aluminum alloy wheel and a long bracket, to enhance servo performance.
Specification
| No | Items | Electrical Specification | |
| 1 | Operating Voltage Range | 4.8 - 7.2V | |
| No | Testing Environment | 6 volts | 7.2 volts |
| 2 | Operating Speed (without payload) | 0.18 sec/60° | 0.16 sec/60° |
| 3 | Quiescent Current | 80 mA | 100 mA |
| 4 | Stall Torque | 13.5 kg * cm | 15 kg * cm |
| 5 | Stall Current | 1.8 A | 2 A |
| 6 | Standby Mode Current | 4 mA | 5 mA |
| No | Items | Control Specification |
| 1 | Control Signal | RC PWM |
| 2 | Pulse Width Range | 500 - 2500 us |
| 3 | Neutral Position Signal | 1500 us |
| 4 | Clockwise Rotation | < 1500 us |
| 5 | Operating Frequency | 50 - 330Hz (Arduino Compatible) |
| No | Items | Mechanical Specification |
| 1 | Materials of Gear | Metal Gear |
| 2 | Limited Angle | 180° |
| 3 | Connector Wire Gauge | 28 PVC |
| 4 | Wire Length | 320 mm |
| 5 | Horn Gear Spline | 25 T / dia. 5.80 |
| 6 | Geared Ratio | 310:1 |
| 7 | Dimension | 54.5 x 20 x 47.5 mm |
Shipping List
- DSS-M15 Servo x1
- Metal Round Servo Horn x1
- X Servo Horn x1
- Long Straight Servo Horn x1
- Straight Servo Horn x1
- M2*8 Self Tapping Screw x5
- M2 Screw Washer x5
- M3*6 Screw x1
