Serial TFT LCD - 3.2" with Touchscreen (uLCD-32PTU-GFX)

Rp. 2,099,000
Availability:
Brand: 4D Systems
Product Code: DIS0011
Qty:     

The µLCD-32PTU is a compact Intelligent Display Module from 4D Systems packed with plenty of features, ready to become the GUI for your project, and capable of being an interface controller for a number of applications.

At the heart of the design is the PICASO processor, which is driven by a highly optimised virtual core engine called EVE (Extensible Virtual Engine). A whole bunch of hardware and software peripherals have been integrated into the design, to give you the freedom to adapt the module to suit almost any application.

The µLCD-32PTU is a combination of a 3.2” (240x320) LCD Screen, audio amplifier and speaker, micro-SD card connector, Lithium Polymer (LiPo) battery support, along with a group of general purpose input/output pins (GPIO's), including I2C and serial COMMS.

Dimensions

  • 56.32 x 92.19 x 15.9mm (including corner plates)

Features

  • Low-cost 3.2" LCD-TFT display graphics user interface solution
  • 240 x 320 VGA resolution, RGB 65K true to life colours, TFT screen with Integrated 4-Wire Resistive Touch Panel
  • Easy 5 pin interface to any host device:
  • VCC, TX, RX, GND, RESET
  • Powered by the 4D-Labs PICASO processor
  • 14KB of flash memory for user code storage and 14KB of SRAM for user variables, or 14KB shared user code and program variables
  • 2 x Asynchronous hardware serial ports (COM0, COM1), TTL interface, with 300 to 600K baud
  • 1 x I2C interface (Master)
  • 8 x 16 bit timers with 1 millisecond resolution
  • 13 x General Purpose I/O pins. Supports fast 8-bit parallel data transfer through Upper 8 bits
  • On-board micro-SD memory card adapter for multimedia storage and data logging purposes. HC memory card support is also available for cards larger than 4GB
  • DOS compatible file access (FAT16 format) as well as low level access to card memory
  • Lithium Polymer battery support, with built in battery charger and automatic change-over
  • Dedicated PWM Audio pin driven by WAV files from micro-SD card
  • On-board audio amplifier with a tiny 8Ω speaker for sound generation and WAV file playback
  • Built in extensive 4DGL graphics and system library functions
  • Display full color images, animations, icons and video clips
  • Supports all available Windows fonts
  • A 30 pin header for I/O expansion and future plug-in daughter boards
  • 4.0V to 5.5V range operation (single supply)
  • Display Viewing Area: 48.60 x 64.80mm
  • 4 x corner plates with 2.7mm holes for mechanical mounting.

Documents

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating:    Bad            Good