DFRduino UNO V2.0

Rp. 229,000
Availability:
Brand: DFRobot
Product Code: ARD0051
Product viewed: 1899
Qty:     

Tags:


Overview

This is the DFRduino Uno V2.0 from DFRobot. It is fully compatible with Arduino UNO R2. This board features the ATmega8U2 programmed as a USB-to-serial converter and it has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU. An added bonus is that our DFRduino is still using the DIP package AVR Chip, which means you can remove it to update/reprogram the chip's firmware, or even to place it on a finished, more compact project.

The cool thing about our new DFRduino microcontroller is that the headers use different colors to feature I/O ports of different types, red for Power Section, blue for Analog I/O, green for Digital I/O. These colors match our sensor cables. This makes it really easy to figure out where to connect sensors, or to identify which side is Analog(blue) or Digital (green).

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

Spesifikasi

  • Microcontroller   ATmega328 (DIP Package)
  • Operating Voltage   5V
  • Input Voltage (recommended) 7-12V
  • Input Voltage (limits)   6-20V
  • Digital I/O Pins   14 (of which 6 provide PWM output)
  • Analog Input Pins   6
  • DC Current per I/O Pin   40 mA
  • DC Current for 3.3V Pin   50 mA
  • Flash Memory   32 KB of which 2KB used by bootloader
  • Clock Speed   16 MHz
  • Size:75x54x15 mm
  • Weight:45 gram
  • Envionment Friendly: Rohs Compliance

Kelengkapan

  • DFRduino Uno V2.0 (1 unit)

Link Dokumentasi

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating:    Bad            Good

Enter the code in the box below:




Related Products

Tags: